How-To Guide

How to Read Reflected Ceiling Plans

Understand RCPs and coordinate everything that goes in the ceiling

The reflected ceiling plan (RCP) shows what you'd see if you looked up at the ceiling, but drawn as if you're looking down at a mirror on the floor. It's where lights, diffusers, sprinklers, and speakers all compete for space. Understanding RCPs is essential for ceiling coordination.

Step 1: Understand the "Reflected" Concept

The orientation can be confusing at first:

Why "Reflected"?

Imagine a mirror on the floor. Looking down at the mirror, you see the ceiling reflected. This keeps the same orientation as the floor plan, so left is still left and right is still right.

This means the RCP and floor plan should align when overlaid. Grid lines, walls, and columns should be in the same locations.

Step 2: Identify Ceiling Types

Different ceiling types have different coordination requirements:

ACT (Acoustic Ceiling Tile)
Grid pattern shown, typically 2'x2' or 2'x4'
Coordination: Items must align with grid
GWB (Gypsum Wallboard)
Shown as blank or with light hatch
Coordination: Access panels needed for above-ceiling items
Exposed Structure
Often shown with note "EXP. STR. ABV."
Coordination: All elements visible, paint/finish critical
Specialty Ceilings
Wood, metal, etc. shown per manufacturer grid
Coordination: Special detailing required

Step 3: Find Ceiling Heights

Ceiling heights are critical for MEP coordination:

Look for height callouts in each room (e.g., CLG @ 9'-0" AFF)
Note changes in ceiling height with heavy lines
Check for soffits (lowered areas) that may hide ductwork
Verify ceiling heights work with structural depth above
Confirm door head heights fit below ceiling

Step 4: Identify Elements in the Ceiling

Multiple disciplines place items in the ceiling plane:

Light FixturesElectrical
Air DiffusersMechanical
Return Air GrillesMechanical
Sprinkler HeadsFire Protection
Smoke DetectorsFire Alarm
SpeakersLow Voltage
Access PanelsMultiple
Exit SignsElectrical

Step 5: Check Grid Alignment

For ACT ceilings, items should align with the tile grid:

Lights typically center in tiles or span multiple tiles
Diffusers should fit within tile cutouts
Sprinkler heads may center in tiles or at grid intersections
Access panels are typically 2'x2' (one full tile)
Grid starting point affects all element placement
Coordination Tip
Items can't occupy the same tile. Two 2'x2' lights can't go in the same location as a diffuser. The RCP should show the architect's intent for how to resolve these conflicts.

Step 6: Verify Against Other Drawings

Cross-reference the RCP with other disciplines:

Electrical Lighting Plan
Light fixtures match locations and types
Mechanical Plan
Diffuser locations and sizes match
Fire Protection Plan
Sprinkler head locations coordinate
Fire Alarm Plan
Detector locations match
Interior Elevations
Ceiling heights match room elevations

Related Guides

RCP Coordination Guide
Priority order for lights, diffusers, and sprinklers.
How to Read MEP Drawings
Understand HVAC, electrical, and plumbing plans.

Automate Ceiling Coordination Checks

Checking that all ceiling elements align across multiple drawings is tedious. Articulate's AI can automatically compare your RCP against MEP drawings to find conflicts before installation.

Try Automated Ceiling Coordination